Potentiostat | Galvanostat

Potentiostat galvanostat w/differential electrometer: 1 µA - 1 A with 25 V compliance; Impedance spectroscopy 0.01 Hz - 10 KHz, advanced battery cycling

EZstat-HV high-voltage electrochemical potentiostat delivers up to 1.0 amp at 25 V versus reference electrode. Ideal for surface oxide preparation.

The Powerstat 05 and Powerstat 20; 5 and 20 amps respectively; Electrochemical impedance spectroscopy: 0.01 Hz to 10 kHz. Low noise potentiostat/ galvanostats powered by National Instruments.

Bipotentiostat - galvanostat: 25 V compliance. Disc electrode: 1 µA to 1A (±10 V); Scan rates up to 100 V/s. Ring electrode: 1 µA to 2 mA (±5 V).

arrayPGstat potentiostat/galvanostats: Mulltichannel battery charge-discharge cycler. For any selected cutoff voltage or current, early finishers are held at open circuit until all cells complete the charge or discharge period: All cells are switched at identical state-of-charge.

National Instruments PXI chassis enable multichannel integration of any NuVant instrument. Once computer controls all with a high speed chassis back plane.